Nordica Promachine 3 Review | GearJunkie Tested

It’s been a garbage snow year in Colorado so far, which means a whole lot of turns on groomers and not much back bowl action. Fortunately, those groomers are magnificent testing grounds for Nordica’s newest flagship boot, the Promachine 3.

So I leaned hard on my uphill boot, throttling into the Faction Dancer skis I was also testing, and let their legs open up. I was on the front side of Copper Mountain, ripping down Rosi’s Run under the Super Bee lift. It was late afternoon, and the crowd had thinned to a few stragglers.

I made an arcing turn under the steep face of the run, imagining myself crashing gates in the recent World Cup events held there. Wind screamed in my ears as my face melted into a grin under my goggles and gaiter.

The Promachine 3 flexed hard under my 160-pound body weight, but it was nowhere near collapsing. It drove the skis with precision, hugging my foot and boosting my confidence as I pushed myself faster down the last drop to a straight line into the flats. I threw up a cloud of snow as I neared the lodge, kicked off my skis, and looked up at the hill.

Damn, skiing is fun. Even with a thin snow year, there’s nothing quite like it.

In short: The Nordica Promachine 3 is a narrow fit (98mm), stiff (130 flex), high-performance boot. Unlike other trendy boots, the Promachine 3 has no dials. Read that again: This flagship boot has four buckles, no dials! For skiers who prefer old-school closures but still want class-leading performance in a narrow, snug, yet relatively comfortable boot, look no further. Just one note, it’s a real bitch to get on.

Compare the Promachine 3 with other top ski boots in our guide to the best ski boots.

Nordica Promachine 3 Review

Full transparency here: I’ve only had the Promachine on the snow for one day so far. The boot just dropped today, and this brief review is based on my first impressions after a day of skiing fast groomers and a handful of bumps at Copper Mountain. I’ll be skiing it a lot more this season, so I will update this review in late spring, and I’ll add a product rating when I do.

Let’s start with my one negative about the boot: It’s tough to put on, especially the first couple of times. Make sure it’s nice and warm, and pull the tongue to the side hard. Grit your teeth a little. And remember, the pain will subside once you slip into the shockingly comfortable, snug ski boot.

Insertion complete, I walked from the free parking at Copper Mountain to the Super Bee lift. It took about 10 minutes. The GripWalk sole provided decent traction, but let’s be clear, these boots ain’t made for walking.

But at the top of the Super Bee, I tightened the four buckles and speed strap, dropped in, and the boots buzzed to life.

I started with some loping carvings, long, leaning etchings across the hard-packed snow. Confidence and control took over. I railed in harder, dropping onto steeper terrain. My skis bit into the snow, throwing my weight into the boots before I pushed out of the turn. Weightlessness took over for a moment before I rammed into the opposite turn.

I paid close attention to my feet. Not much pain there. I felt the contours of the stiff, supportive boot and liner move in unison with my feet and lower leg.

I wiggled my toes. Interestingly, I felt a modest amount of extra space around my toes, especially in the area Nordica calls the “sixth toe zone,” and also above my instep. While overall a snug, precise fit, the Promachine 3, at least on me, did offer space in places that do tend to get sore.

Of course, your experience will vary. My feet are average to slightly wide, and they fit most shoes and boots well. The Promachine 3 fits well right out of the box. I haven’t even heat-molded them yet, although I intend to.

I hammered the Super Bee for a few hours, skiing fast with few breaks. My legs were getting tired by the time I tapped out in late afternoon. But my feet were still pretty happy. For a pair of new, 98-lasted boots, I couldn’t ask for much more.

Nordica Promachine 3: What the Brand Says

Given my limited skiing days on the Promachine 3, I want to share some details from the press release about the new boot, which just dropped today on Jan. 15.

“For more than two years, Nordica has been quietly and relentlessly at work testing, refining, and reimagining what a precision alpine boot can be,” Nordica stated in a press release. “This is not a simple update. It is a ground-up evolution built from the snow up.”

Nordica’s integrated “3Force Frame” forms the core of the Promachine 3. This “next-generation construction” combines materials to enhance lateral stiffness while providing a smooth, progressive flex. The asymmetrical shell design increases energy transmission directly to the ski edge.

Around back, a fully redesigned spine anchors the boot’s performance. It provides enhanced support against getting backseat while delivering an exceptionally consistent flex pattern — smooth, controlled, and refined.

The brand claims that testers describe the sensation as “powerful yet fluid, aggressive yet predictable, controlled under pressure.” And after a little time with the boot, I have to agree.

Narrow Fit

The Promachine 3 is a 98mm last ski boot. That’s a slightly narrow fit, but nothing ridiculous. The brand aimed for a precise fit here, while still allowing room around the toes, instep, and navicular for comfort. It claims an “anatomical” fit.

On my foot, it feels pretty darned good. However, the issue is that every foot is different. Step into the Promachine 3 if you get a chance and see how it feels in real life.

3D Custom Cork Speed Lace Liner

I pulled the liner out of the Promachine and must admit, it’s pretty darned nice. Not only does the liner leverage the insulative, responsive, and customizable nature of cork, but it also offers an integrated Speed Lace closure in the Promachine 3 130 S version that I tested.

That means you can really snug up the liner once you’ve stepped into the boot by pulling a speed lace system. I loved the fit of the liner right out of the box, and I look forward to heating it up to mold perfectly to my feet. I know that it’ll really sculpt to my own foot over time, but nothing speeds that process like a little heat molding. I’ll update this section with any changes after I heat mold them.

Who It’s For

The Nordica Promachine 3 S debuts today with a 130 flex for men and 115 flex for women. On Feb. 1, the Promachine 3 collection expands to include the 120 men’s flex and 95 women’s flex models.

The Promachine is first and foremost a high-performance ski boot. It offers advanced and expert skiers a precise, 98mm boot designed to charge steep terrain, go fast, and send it seriously. While relatively comfortable, this is not a boot for beginners or those who can’t tolerate a slightly snug boot sensation.

But if you’re in the market for high-performance ski boots with a lot of progressive stiffness, the Promachine 3 is an excellent place to start. During my limited time in the boot, I thoroughly enjoyed pushing myself to my own limits. I think, given my modest size and aversion to epic crashes, I left a lot in the tank with this boot, which should serve even heavier and more aggressive skiers well.